Climatic Chamber

Climatic Chamber

To Simulate the environmental conditions such as temperature and humidity for testing and calibration of sub assemblies and assemblies based on customer requirements and standards.

Specifications

Value

Temperature

-70 to +180°C

Relative humidity

10% to 95%

Cryo-Test Chamber

Cryo-Test Chamber

To Simulate the Environmental conditions with wide range of temperature using LN2 for testing and calibration of sub assemblies and assemblies based on customer requirements and standards.

Specifications

Value

Temperature

-170 to +150°C

Cooling Media

LN2

Thermo Vacuum Chamber

Thermo Vacuum Chamber

Thermo vacuum chamber is compatible for conducting thermo vacuum test at temperature range of -70°C to 150°C with high vacuum of better than 1×10-5 for sub assemblies and assemblies based on customer requirements and standards.

Specifications

Value

Temperature

-70 to +150°C

Operating Vacuum level

Better than 1×10-5

Vibration Shaker

Vibration Shaker

To Simulate the Vibrational Environmental conditions such as Sine, Random and shock on sub assemblies and assemblies based on customer requirements and standards.

Specifications

Value

Sine force peak

35585 N

Random force rms (ISO5344)

35585 N

Half sine peak bump force

106752 N

Armature resonance (fn)

2650 Hz

Useful frequency range

d.c. to 3000 Hz

Effective mass of moving element with flush inserts

31.6 kg

Mass Spectro-Helium Leak detector

Mass Spectro-Helium Leak detector

To ensure leakage in assembly and sub assembly parts after welding and brazing.

Specifications

Value

Measuring Range

5×10-12 -1 mbar l/s

Sensitivity

1×10-12 mbar l/s

Max. Operating Pressure

25 mbar

Smallest detectable He leak rate(Vacuum mode)

5×10-12 mbar l/s

Smallest detectable He leak rate(Sniffer mode)

5×10-8 mbar l/s

Torque Testing Facility

Torque Testing Facility

In house deigned facility for measurement of speed and torque charecteristics of Motor assemblies.

Actuator Load Testing Facility

Actuator Load Testing Facility

In-house designed facility for testing of pulling load and pushing load of Electrical actuator.

Specifications

Value

Loading Range

5-75 Kg Forward & Reverse

Dead Weight (Pneumatic and hydraulic pressure) Calibration

Dead Weight (Pneumatic and hydraulic pressure) Calibration

Specifications

Value

Pneumatic pressure testing

0-100 bar / 0-1450 psi

Hydraulic pressure testing

0-1500 bar / 0-21750 psi

Differential Pressure Calibrator

Differential Pressure Calibrator

Specifications

Value

Differential pressure testing

0-100 bar / 0-1450 psi

Spring Calibration Test

Spring Calibration Test

Pneumatic Crimping Facilities

Pneumatic Crimping Facilities

Manual & Pneumatic crimping facility

Value

Pneumatic crimping facility

2 ton

Pneumatic and Hydraulic Proof Pressure Test

Pneumatic and Hydraulic Proof Pressure Test

Specifications

Value

No. Of Test unit type

2 No’s

Working Medium

Hydraulic Oil, Deionized Water

Max Outlet Pressure

Hydraulic Oil (Up to 1034 bar), Deionized Water (upto 690 bar)

For more information please contact “info@lakshmitech.com